Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 2022 Top Searches

These results are ranked by popularity.

Error
835Description: Self-Diagnostic Error: Parallel Interface Loopback test error.
354Description: ID Sensor Adjustment Error 2 Error occurred during automatic adjustment of Vsg. Vsg could not be adjusted to 4.0V±0.2V within 50 ms even after 20 attempts.
633Description: Counter device error 2 After 3 attempts to send a data frame to the optional counter device via the serial communication line, no ACK signal was received within 100 ms.
995Description: Machine Type Information Error After the machine is powered on, a mismatch is detected between the CPM information sent from the controller to the engine. The controller boards of the B089 (22 cpm) and B94 (27 cpm) are not interchangeable.
856Description: Wireless LAN board error An error is detected for the wireless LAN card (802.11b or Bluetooth).

Ricoh Aficio 2022 Common Errors

The most common error codes.

Error
835Description: Self-Diagnostic Error: Parallel Interface Loopback test error.
354Description: ID Sensor Adjustment Error 2 Error occurred during automatic adjustment of Vsg. Vsg could not be adjusted to 4.0V±0.2V within 50 ms even after 20 attempts.
633Description: Counter device error 2 After 3 attempts to send a data frame to the optional counter device via the serial communication line, no ACK signal was received within 100 ms.
995Description: Machine Type Information Error After the machine is powered on, a mismatch is detected between the CPM information sent from the controller to the engine. The controller boards of the B089 (22 cpm) and B94 (27 cpm) are not interchangeable.
856Description: Wireless LAN board error An error is detected for the wireless LAN card (802.11b or Bluetooth).
995Description: Machine Type Information Error After the machine is powered on, a mismatch is detected between the CPM information sent from the controller to the engine. The controller boards of the B089 (22 cpm) and B94 (27 cpm) are not interchangeable.
354Description: ID Sensor Adjustment Error 2 Error occurred during automatic adjustment of Vsg. Vsg could not be adjusted to 4.0V±0.2V within 50 ms even after 20 attempts.
633Description: Counter device error 2 After 3 attempts to send a data frame to the optional counter device via the serial communication line, no ACK signal was received within 100 ms.
835Description: Self-Diagnostic Error: Parallel Interface Loopback test error.
862Description: Maximum number of bad sectors detected on HD Up to 101 bad sectors have appeared in the area on the hard disk where image data is archived, and the hard disk may require replacement.