Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 2018D Top Searches

These results are ranked by popularity.

Error
506Description: Paper feed motor lock (optional paper tray units) A motor lock signal is not detected for more than 1.5 s or the lock signal is not detected for more than 1.0 s during rotation.
829Description: Self-diagnostic Error: Optional RAM The optional RAM returned an error during the self-diagnostic test.
901Description: Mechanical total counter The mechanical total counter does not work properly.
868Description: SD card access error 2 Incorrect data is detected in the SD card.
555Description: Fusing lamp overheat error (rear) After the fusing temperature reaches the target temperature, the fusing lamp does not turn off for 20 consecutive seconds.

Ricoh Aficio 2018D Common Errors

The most common error codes.

Error
506Description: Paper feed motor lock (optional paper tray units) A motor lock signal is not detected for more than 1.5 s or the lock signal is not detected for more than 1.0 s during rotation.
829Description: Self-diagnostic Error: Optional RAM The optional RAM returned an error during the self-diagnostic test.
901Description: Mechanical total counter The mechanical total counter does not work properly.
868Description: SD card access error 2 Incorrect data is detected in the SD card.
555Description: Fusing lamp overheat error (rear) After the fusing temperature reaches the target temperature, the fusing lamp does not turn off for 20 consecutive seconds.
506Description: Paper feed motor lock (optional paper tray units) A motor lock signal is not detected for more than 1.5 s or the lock signal is not detected for more than 1.0 s during rotation.
829Description: Self-diagnostic Error: Optional RAM The optional RAM returned an error during the self-diagnostic test.
901Description: Mechanical total counter The mechanical total counter does not work properly.
868Description: SD card access error 2 Incorrect data is detected in the SD card.
555Description: Fusing lamp overheat error (rear) After the fusing temperature reaches the target temperature, the fusing lamp does not turn off for 20 consecutive seconds.