Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 2016 Top Searches

These results are ranked by popularity.

Error
553Description: Fusing overheat error (rear) The fusing temperature is over 230°C for 1 second (detected by the thermistor).
867Description: SD card access error 1 After the program saved in the SD card starts running, the SD card is removed from the slot.
981Description: NVRAM error The machine detects a discrepancy in the NVRAM write/read data when attempting to save actual data to the NVRAM (i.e. during actual use).
321Description: No laser writing signal (F-GATE) error The laser writing signal (F-GATE) fails to turn Low after the laser crosses 5 mm on the drum surface from the laser writing start position.
800Description: Startup without video output end error Video transfer to the engine is started, but the engine did not issue a video transmission end command within the specified time.

Ricoh Aficio 2016 Common Errors

The most common error codes.

Error
553Description: Fusing overheat error (rear) The fusing temperature is over 230°C for 1 second (detected by the thermistor).
867Description: SD card access error 1 After the program saved in the SD card starts running, the SD card is removed from the slot.
981Description: NVRAM error The machine detects a discrepancy in the NVRAM write/read data when attempting to save actual data to the NVRAM (i.e. during actual use).
321Description: No laser writing signal (F-GATE) error The laser writing signal (F-GATE) fails to turn Low after the laser crosses 5 mm on the drum surface from the laser writing start position.
800Description: Startup without video output end error Video transfer to the engine is started, but the engine did not issue a video transmission end command within the specified time.
867Description: SD card access error 1 After the program saved in the SD card starts running, the SD card is removed from the slot.
553Description: Fusing overheat error (rear) The fusing temperature is over 230°C for 1 second (detected by the thermistor).
800Description: Startup without video output end error Video transfer to the engine is started, but the engine did not issue a video transmission end command within the specified time.
321Description: No laser writing signal (F-GATE) error The laser writing signal (F-GATE) fails to turn Low after the laser crosses 5 mm on the drum surface from the laser writing start position.
981Description: NVRAM error The machine detects a discrepancy in the NVRAM write/read data when attempting to save actual data to the NVRAM (i.e. during actual use).