Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 2015 Top Searches

These results are ranked by popularity.

Error
506Description: Paper feed motor lock (optional paper tray units) A motor lock signal is not detected for more than 1.5 s or the lock signal is not detected for more than 1.0 s during rotation.
829Description: Self-diagnostic Error: Optional RAM The optional RAM returned an error during the self-diagnostic test.
555Description: Fusing lamp overheat error (rear) After the fusing temperature reaches the target temperature, the fusing lamp does not turn off for 20 consecutive seconds.
868Description: SD card access error 2 Incorrect data is detected in the SD card.
101Description: Exposure Lamp Error The standard white level was not detected properly when scanning the white plate.

Ricoh Aficio 2015 Common Errors

The most common error codes.

Error
506Description: Paper feed motor lock (optional paper tray units) A motor lock signal is not detected for more than 1.5 s or the lock signal is not detected for more than 1.0 s during rotation.
829Description: Self-diagnostic Error: Optional RAM The optional RAM returned an error during the self-diagnostic test.
555Description: Fusing lamp overheat error (rear) After the fusing temperature reaches the target temperature, the fusing lamp does not turn off for 20 consecutive seconds.
868Description: SD card access error 2 Incorrect data is detected in the SD card.
101Description: Exposure Lamp Error The standard white level was not detected properly when scanning the white plate.
506Description: Paper feed motor lock (optional paper tray units) A motor lock signal is not detected for more than 1.5 s or the lock signal is not detected for more than 1.0 s during rotation.
829Description: Self-diagnostic Error: Optional RAM The optional RAM returned an error during the self-diagnostic test.
555Description: Fusing lamp overheat error (rear) After the fusing temperature reaches the target temperature, the fusing lamp does not turn off for 20 consecutive seconds.
868Description: SD card access error 2 Incorrect data is detected in the SD card.
101Description: Exposure Lamp Error The standard white level was not detected properly when scanning the white plate.