These results are ranked by popularity.
| Error | |
|---|---|
| SC543 | Description: Fusing overheat error A fusing temperature of over 231°C is detected for 1 second by the fusing thermistor. |
| SC901 | Description: Mechanical Total Counter The mechanical total counter is not working properly. |
| SC320 | Description: Polygon motor error The polygon motor does not reach its operating speed within 10 seconds after the polygon motor on signal, or the lock signal is not detected for more than 200 ms continuously during operation. |
| SC730 | Description: Finisher stapler position motor error 1) The stapler does not return to its home position within a certain time after the stapler motor turned on. 2) The stapler H.P sensor does not activate within a certain time after the stapler motor tur |
| SC501 | Description: 1st paper tray lift motor malfunction The paper lift sensor is not activated after the tray lift motor has been on for 18 seconds. |
The most common error codes.
| Error | |
|---|---|
| SC543 | Description: Fusing overheat error A fusing temperature of over 231°C is detected for 1 second by the fusing thermistor. |
| SC901 | Description: Mechanical Total Counter The mechanical total counter is not working properly. |
| SC320 | Description: Polygon motor error The polygon motor does not reach its operating speed within 10 seconds after the polygon motor on signal, or the lock signal is not detected for more than 200 ms continuously during operation. |
| SC730 | Description: Finisher stapler position motor error 1) The stapler does not return to its home position within a certain time after the stapler motor turned on. 2) The stapler H.P sensor does not activate within a certain time after the stapler motor tur |
| SC501 | Description: 1st paper tray lift motor malfunction The paper lift sensor is not activated after the tray lift motor has been on for 18 seconds. |
| SC543 | Description: Fusing overheat error A fusing temperature of over 231°C is detected for 1 second by the fusing thermistor. |
| SC901 | Description: Mechanical Total Counter The mechanical total counter is not working properly. |
| SC320 | Description: Polygon motor error The polygon motor does not reach its operating speed within 10 seconds after the polygon motor on signal, or the lock signal is not detected for more than 200 ms continuously during operation. |
| SC730 | Description: Finisher stapler position motor error 1) The stapler does not return to its home position within a certain time after the stapler motor turned on. 2) The stapler H.P sensor does not activate within a certain time after the stapler motor tur |
| SC501 | Description: 1st paper tray lift motor malfunction The paper lift sensor is not activated after the tray lift motor has been on for 18 seconds. |
