Ricoh Aficio 120 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 120 Top Searches

These results are ranked by popularity.

Error
322Description: Laser synchronization error Detected LD error signal for continuous 1.5 seconds while polygon mirror motor was running at constant speed.
546Description: Unstable fusing temperatureDetected that fusing temperature changed more than +-25°C/second two seconds in succession.
101Description: Exposure Lamp Error Insufficient white level detected when scanning the white plate.
390Description: TD sensor error The TD sensor output less than 0.33 V or greater than 2.64 V ten times in succession.
547Description: Zero-cross detection error Detection error (detection overflow or busy) occurred 8 times in succession (at 20-ms intervals) while 24V power was on.

Ricoh Aficio 120 Common Errors

The most common error codes.

Error
322Description: Laser synchronization error Detected LD error signal for continuous 1.5 seconds while polygon mirror motor was running at constant speed.
546Description: Unstable fusing temperatureDetected that fusing temperature changed more than +-25°C/second two seconds in succession.
101Description: Exposure Lamp Error Insufficient white level detected when scanning the white plate.
390Description: TD sensor error The TD sensor output less than 0.33 V or greater than 2.64 V ten times in succession.
547Description: Zero-cross detection error Detection error (detection overflow or busy) occurred 8 times in succession (at 20-ms intervals) while 24V power was on.
322Description: Laser synchronization error Detected LD error signal for continuous 1.5 seconds while polygon mirror motor was running at constant speed.
546Description: Unstable fusing temperatureDetected that fusing temperature changed more than +-25°C/second two seconds in succession.
101Description: Exposure Lamp Error Insufficient white level detected when scanning the white plate.
390Description: TD sensor error The TD sensor output less than 0.33 V or greater than 2.64 V ten times in succession.
547Description: Zero-cross detection error Detection error (detection overflow or busy) occurred 8 times in succession (at 20-ms intervals) while 24V power was on.