Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 1113 Top Searches

These results are ranked by popularity.

Error
760Description: ADF gate abnormal The ADF Gate signal line between the ADF main board and the IOB is disconnected.
321Description: No laser writing signal (F-GATE) error The laser writing signal (F-GATE) fails to turn Low after the laser crosses 5 mm on the drum surface from the laser writing start position.
541Description: Fusing thermostat/thermistor open The fusing temperature detected by the thermistor is below 10°C for 5 seconds after the main power switch is turned on.
900Description: Electrical total counter error The electrical total counter does not work properly.
101Description: Exposure Lamp Error The standard white level was not detected properly when scanning the white plate

Ricoh Aficio 1113 Common Errors

The most common error codes.

Error
760Description: ADF gate abnormal The ADF Gate signal line between the ADF main board and the IOB is disconnected.
321Description: No laser writing signal (F-GATE) error The laser writing signal (F-GATE) fails to turn Low after the laser crosses 5 mm on the drum surface from the laser writing start position.
541Description: Fusing thermostat/thermistor open The fusing temperature detected by the thermistor is below 10°C for 5 seconds after the main power switch is turned on.
900Description: Electrical total counter error The electrical total counter does not work properly.
101Description: Exposure Lamp Error The standard white level was not detected properly when scanning the white plate
760Description: ADF gate abnormal The ADF Gate signal line between the ADF main board and the IOB is disconnected.
321Description: No laser writing signal (F-GATE) error The laser writing signal (F-GATE) fails to turn Low after the laser crosses 5 mm on the drum surface from the laser writing start position.
541Description: Fusing thermostat/thermistor open The fusing temperature detected by the thermistor is below 10°C for 5 seconds after the main power switch is turned on.
900Description: Electrical total counter error The electrical total counter does not work properly.
101Description: Exposure Lamp Error The standard white level was not detected properly when scanning the white plate