These results are ranked by popularity.
| Error | |
|---|---|
| SC703 | Description: ADF transport motor lock The encoder signal cannot be detected within a specific time when the transport motor is on. |
| SC301 | Description: Charge corona output error 2 The control PWM for the charge corona unit is too high. |
| SC367 | Description: Hard disk (HDD:R) bad sector maximum The number of bad sectors on the HDD is over the maximum number. |
| SC954 | Description: Printer image setting error The settings that are required for image processing using the printer controller are not sent from the IPU. |
| SC323 | Description: LD drive current over The LD drive board applies more than 110 mA to the LD. |
The most common error codes.
| Error | |
|---|---|
| SC703 | Description: ADF transport motor lock The encoder signal cannot be detected within a specific time when the transport motor is on. |
| SC301 | Description: Charge corona output error 2 The control PWM for the charge corona unit is too high. |
| SC367 | Description: Hard disk (HDD:R) bad sector maximum The number of bad sectors on the HDD is over the maximum number. |
| SC954 | Description: Printer image setting error The settings that are required for image processing using the printer controller are not sent from the IPU. |
| SC323 | Description: LD drive current over The LD drive board applies more than 110 mA to the LD. |
| SC703 | Description: ADF transport motor lock The encoder signal cannot be detected within a specific time when the transport motor is on. |
| SC301 | Description: Charge corona output error 2 The control PWM for the charge corona unit is too high. |
| SC367 | Description: Hard disk (HDD:R) bad sector maximum The number of bad sectors on the HDD is over the maximum number. |
| SC954 | Description: Printer image setting error The settings that are required for image processing using the printer controller are not sent from the IPU. |
| SC323 | Description: LD drive current over The LD drive board applies more than 110 mA to the LD. |
