Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 1050 Top Searches

These results are ranked by popularity.

Error
SC336Description: Polygonal mirror motor error 2 The XSCRDY signal does not become high within 20 seconds after the polygonal mirror motor turns off.
SC705Description: ADF bottom plate motor error 1) The bottom plate position sensor does not turn on when the bottom plate motor lifts the bottom plate. 2) The bottom plate HP sensor does not turn on when the bottom plate motor lowers the bottom plate.
SC990Description: Software performance error The software performs an unexpected function.
SC497Description: Toner recycling motor error The toner recycling motor connector set signal remains off for 1 second.
SC543Description: Fusing overheat error 1 (software) A fusing temperature of over 230°C is detected for 5 seconds by the fusing thermistor.

Ricoh Aficio 1050 Common Errors

The most common error codes.

Error
SC336Description: Polygonal mirror motor error 2 The XSCRDY signal does not become high within 20 seconds after the polygonal mirror motor turns off.
SC705Description: ADF bottom plate motor error 1) The bottom plate position sensor does not turn on when the bottom plate motor lifts the bottom plate. 2) The bottom plate HP sensor does not turn on when the bottom plate motor lowers the bottom plate.
SC990Description: Software performance error The software performs an unexpected function.
SC497Description: Toner recycling motor error The toner recycling motor connector set signal remains off for 1 second.
SC543Description: Fusing overheat error 1 (software) A fusing temperature of over 230°C is detected for 5 seconds by the fusing thermistor.
SC336Description: Polygonal mirror motor error 2 The XSCRDY signal does not become high within 20 seconds after the polygonal mirror motor turns off.
SC705Description: ADF bottom plate motor error 1) The bottom plate position sensor does not turn on when the bottom plate motor lifts the bottom plate. 2) The bottom plate HP sensor does not turn on when the bottom plate motor lowers the bottom plate.
SC990Description: Software performance error The software performs an unexpected function.
SC497Description: Toner recycling motor error The toner recycling motor connector set signal remains off for 1 second.
SC543Description: Fusing overheat error 1 (software) A fusing temperature of over 230°C is detected for 5 seconds by the fusing thermistor.