Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 1035 Top Searches

These results are ranked by popularity.

Error
640Description: BICU control data transfer sumcheck error A sampling of control data sent from the BICU to the controller reveals a sumcheck error. Only the logging count is performed.
850Description: Network I/F Abnormal
391Description: TD sensor error: Auto adjust error During automatic adjustment of the TD sensor, output voltage is less than 1.8V or more than 4.8V during TD sensor initial setting.
953Description: Scanner setting error The IPU does not respond with the scanner setting signal required to start scanning processing.
503Description: 3rd tray lift malfunction (optional paper tray unit) The paper height sensor is not activated after the tray lift motor has been on for 13 seconds. If the main power switch is turned on when the paper is already at the feed height, the pape

Ricoh Aficio 1035 Common Errors

The most common error codes.

Error
640Description: BICU control data transfer sumcheck error A sampling of control data sent from the BICU to the controller reveals a sumcheck error. Only the logging count is performed.
850Description: Network I/F Abnormal
391Description: TD sensor error: Auto adjust error During automatic adjustment of the TD sensor, output voltage is less than 1.8V or more than 4.8V during TD sensor initial setting.
953Description: Scanner setting error The IPU does not respond with the scanner setting signal required to start scanning processing.
503Description: 3rd tray lift malfunction (optional paper tray unit) The paper height sensor is not activated after the tray lift motor has been on for 13 seconds. If the main power switch is turned on when the paper is already at the feed height, the pape
391Description: TD sensor error: Auto adjust error During automatic adjustment of the TD sensor, output voltage is less than 1.8V or more than 4.8V during TD sensor initial setting.
640Description: BICU control data transfer sumcheck error A sampling of control data sent from the BICU to the controller reveals a sumcheck error. Only the logging count is performed.
850Description: Network I/F Abnormal
725Description: Finisher stack feed-out motor error The stack feed-out belt HP sensor does not activate within a certain time after the stack feed-out motor turned on.
953Description: Scanner setting error The IPU does not respond with the scanner setting signal required to start scanning processing.