Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 1022 Top Searches

These results are ranked by popularity.

Error
730Description: Finisher stapler motor error (1000-sheet finisher) The stapler does not return to its home position within a certain time after the stapler motor turned on. The stapler H.P sensor does not activate within a certain time after the stapler mo
490Description: Toner supply motor leak error Over 1 A supplied to the toner supply motor for longer than 200 ms.
955Description: Memory setting error The IPU does not respond with the settings that are required to start image processing using the memory.
541Description: Fusing thermistor open The fusing temperature detected by the thermistor was below 0 °C for 5 seconds. The fusing temperature does not rise +15 °C (center) or +12 °C (at the ends) five times within 2 minutes after the fusing lamps have been
101Description: Exposure lamp error The standard white level was not detected properly when scanning the white plate.

Ricoh Aficio 1022 Common Errors

The most common error codes.

Error
730Description: Finisher stapler motor error (1000-sheet finisher) The stapler does not return to its home position within a certain time after the stapler motor turned on. The stapler H.P sensor does not activate within a certain time after the stapler mo
490Description: Toner supply motor leak error Over 1 A supplied to the toner supply motor for longer than 200 ms.
955Description: Memory setting error The IPU does not respond with the settings that are required to start image processing using the memory.
541Description: Fusing thermistor open The fusing temperature detected by the thermistor was below 0 °C for 5 seconds. The fusing temperature does not rise +15 °C (center) or +12 °C (at the ends) five times within 2 minutes after the fusing lamps have been
101Description: Exposure lamp error The standard white level was not detected properly when scanning the white plate.
730Description: Finisher stapler motor error (1000-sheet finisher) The stapler does not return to its home position within a certain time after the stapler motor turned on. The stapler H.P sensor does not activate within a certain time after the stapler mo
490Description: Toner supply motor leak error Over 1 A supplied to the toner supply motor for longer than 200 ms.
955Description: Memory setting error The IPU does not respond with the settings that are required to start image processing using the memory.
541Description: Fusing thermistor open The fusing temperature detected by the thermistor was below 0 °C for 5 seconds. The fusing temperature does not rise +15 °C (center) or +12 °C (at the ends) five times within 2 minutes after the fusing lamps have been
101Description: Exposure lamp error The standard white level was not detected properly when scanning the white plate.