Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Ricoh Aficio 1018 Top Searches

These results are ranked by popularity.

Error
541Description: Fusing thermostat/thermistor open The fusing temperature detected by the thermistor is below 10°C for 5 seconds after the main power switch is turned on.
101Description: Exposure Lamp Error The standard white level was not detected properly when scanning the white plate
924Description: Optional DRAM error The machine detects a discrepancy in the Optional DRAM write/read data during its write/read test (done at power off/on and at recovery from low power or night/off mode).
900Description: Electrical total counter error The electrical total counter does not work properly.
322Description: Laser synchronization error The main scan synchronization detector board cannot detect the laser synchronization signal for more than 5 consecutive 100 ms intervals.

Ricoh Aficio 1018 Common Errors

The most common error codes.

Error
541Description: Fusing thermostat/thermistor open The fusing temperature detected by the thermistor is below 10°C for 5 seconds after the main power switch is turned on.
101Description: Exposure Lamp Error The standard white level was not detected properly when scanning the white plate
924Description: Optional DRAM error The machine detects a discrepancy in the Optional DRAM write/read data during its write/read test (done at power off/on and at recovery from low power or night/off mode).
900Description: Electrical total counter error The electrical total counter does not work properly.
322Description: Laser synchronization error The main scan synchronization detector board cannot detect the laser synchronization signal for more than 5 consecutive 100 ms intervals.
541Description: Fusing thermostat/thermistor open The fusing temperature detected by the thermistor is below 10°C for 5 seconds after the main power switch is turned on.
101Description: Exposure Lamp Error The standard white level was not detected properly when scanning the white plate
924Description: Optional DRAM error The machine detects a discrepancy in the Optional DRAM write/read data during its write/read test (done at power off/on and at recovery from low power or night/off mode).
900Description: Electrical total counter error The electrical total counter does not work properly.
322Description: Laser synchronization error The main scan synchronization detector board cannot detect the laser synchronization signal for more than 5 consecutive 100 ms intervals.