Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Panasonic UF6100 Top Searches

These results are ranked by popularity.

Error
540Description: No response after transmitting 3rd CTC or DCN received.
400Description: T1 timer (35±5 sec.) elapsed without detecting 300 bps signal.
416Description: Receiver did not detect post command, such as EOP, MPS, EOM, etc.
411Description: Received DCN after transmitting NSC.
001Description: Leading edge of the recording paper fails to reach the Timing Sensor. (1st Cassette)

Panasonic UF6100 Common Errors

The most common error codes.

Error
540Description: No response after transmitting 3rd CTC or DCN received.
400Description: T1 timer (35±5 sec.) elapsed without detecting 300 bps signal.
416Description: Receiver did not detect post command, such as EOP, MPS, EOM, etc.
411Description: Received DCN after transmitting NSC.
001Description: Leading edge of the recording paper fails to reach the Timing Sensor. (1st Cassette)
540Description: No response after transmitting 3rd CTC or DCN received.
400Description: T1 timer (35±5 sec.) elapsed without detecting 300 bps signal.
631Description: "STOP" button was pressed during Auto Dialing.
411Description: Received DCN after transmitting NSC.
001Description: Leading edge of the recording paper fails to reach the Timing Sensor. (1st Cassette)