These results are ranked by popularity.
Error | |
---|---|
110.20...110.92 | Description: 110.20 Printhead error (mirror motor lock is asserted) was detected before the motor was turned on. 110.21 No printhead power (+5V) when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (l |
280.11 | Description: Paper remains detected at the sensor (ADF 1st scan) after the printer is turned on. |
202.x4 | Description: 202.04 Paper fed from the MPF cleared the sensor (fuser exit) earlier than expected. 202.14 Paper fed from tray 1 cleared the sensor (fuser exit) earlier than expected. 202.24 Paper fed from tray 2 cleared the sensor (fuser exit) earlier tha |
665.83 | Description: The motor (tray 5 pick) stalled. |
428.13, 428.15 | Description: 428.13 The staple head fails to reach home at the specified time. 428.15 The staple head fails to leave home at the specified time. |
The most common error codes.
Error | |
---|---|
110.20...110.92 | Description: 110.20 Printhead error (mirror motor lock is asserted) was detected before the motor was turned on. 110.21 No printhead power (+5V) when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (l |
280.11 | Description: Paper remains detected at the sensor (ADF 1st scan) after the printer is turned on. |
202.x4 | Description: 202.04 Paper fed from the MPF cleared the sensor (fuser exit) earlier than expected. 202.14 Paper fed from tray 1 cleared the sensor (fuser exit) earlier than expected. 202.24 Paper fed from tray 2 cleared the sensor (fuser exit) earlier tha |
665.83 | Description: The motor (tray 5 pick) stalled. |
428.13, 428.15 | Description: 428.13 The staple head fails to reach home at the specified time. 428.15 The staple head fails to leave home at the specified time. |
110.20...110.92 | Description: 110.20 Printhead error (mirror motor lock is asserted) was detected before the motor was turned on. 110.21 No printhead power (+5V) when the laser servo started. 110.31 Printhead error (no first Hysnc) was detected. 110.32 Printhead error (l |
280.11 | Description: Paper remains detected at the sensor (ADF 1st scan) after the printer is turned on. |
202.x4 | Description: 202.04 Paper fed from the MPF cleared the sensor (fuser exit) earlier than expected. 202.14 Paper fed from tray 1 cleared the sensor (fuser exit) earlier than expected. 202.24 Paper fed from tray 2 cleared the sensor (fuser exit) earlier tha |
665.83 | Description: The motor (tray 5 pick) stalled. |
428.13, 428.15 | Description: 428.13 The staple head fails to reach home at the specified time. 428.15 The staple head fails to leave home at the specified time. |