Lexmark X945 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark X945 Top Searches

These results are ranked by popularity.

Error
34Description: Incorrect paper type, check tray 4 Tray 4 media type mismatch error The sensor (transparency detect) did not detect transparency media.
943.01Description: 943.01 Service tray 3 failure Sensor (media level) late error (tray 3) The sensing area of the sensor (media level) in the media tray 3 is not interrupted within the specified time after the lift tray has risen to operating level.
999.00Description: Service finisher error Finisher engine/RIP functional failure
911.02Description: Service engine error Fuser cooling fan lock error When the Fuser cooling fan was operating, fan lock was detected for more than 30 seconds.
244.03Description: Paper jam Check area B Sensor (registration) on jam (tray 4 media feed) The sensor (registration) is not turned on within the specified time after the sensor (tray 4 feed-out) is turned on.

Lexmark X945 Common Errors

The most common error codes.

Error
34Description: Incorrect paper type, check tray 4 Tray 4 media type mismatch error The sensor (transparency detect) did not detect transparency media.
943.01Description: 943.01 Service tray 3 failure Sensor (media level) late error (tray 3) The sensing area of the sensor (media level) in the media tray 3 is not interrupted within the specified time after the lift tray has risen to operating level.
999.00Description: Service finisher error Finisher engine/RIP functional failure
911.02Description: Service engine error Fuser cooling fan lock error When the Fuser cooling fan was operating, fan lock was detected for more than 30 seconds.
244.03Description: Paper jam Check area B Sensor (registration) on jam (tray 4 media feed) The sensor (registration) is not turned on within the specified time after the sensor (tray 4 feed-out) is turned on.
34Description: Incorrect paper type, check tray 4 Tray 4 media type mismatch error The sensor (transparency detect) did not detect transparency media.
943.01Description: 943.01 Service tray 3 failure Sensor (media level) late error (tray 3) The sensing area of the sensor (media level) in the media tray 3 is not interrupted within the specified time after the lift tray has risen to operating level.
999.00Description: Service finisher error Finisher engine/RIP functional failure
911.02Description: Service engine error Fuser cooling fan lock error When the Fuser cooling fan was operating, fan lock was detected for more than 30 seconds.
244.03Description: Paper jam Check area B Sensor (registration) on jam (tray 4 media feed) The sensor (registration) is not turned on within the specified time after the sensor (tray 4 feed-out) is turned on.