Lexmark X852e Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark X852e Top Searches

These results are ranked by popularity.

Error
984.01Description: Service finisher error Sensor (punch unit HP) off failure
842.00Description: Service scanner failure Scanner communication failure Controller detected a communication failure. Communication timeout.
956.02Description: Service system board RIP card assembly cooling fan failure The RIP card assembly cooling fan is not functioning properly.
290.01Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim
244.01Description: Paper jam Check areas C, tray 4 Sensor (tray 3 feed-out) on jam (tray 4 media feed) The sensor (tray 3 feed-out) is not turned on within the specified time after the sensor (tray 4 feed-out) is turned on.

Lexmark X852e Common Errors

The most common error codes.

Error
984.01Description: Service finisher error Sensor (punch unit HP) off failure
842.00Description: Service scanner failure Scanner communication failure Controller detected a communication failure. Communication timeout.
956.02Description: Service system board RIP card assembly cooling fan failure The RIP card assembly cooling fan is not functioning properly.
290.01Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim
244.01Description: Paper jam Check areas C, tray 4 Sensor (tray 3 feed-out) on jam (tray 4 media feed) The sensor (tray 3 feed-out) is not turned on within the specified time after the sensor (tray 4 feed-out) is turned on.
984.01Description: Service finisher error Sensor (punch unit HP) off failure
842.00Description: Service scanner failure Scanner communication failure Controller detected a communication failure. Communication timeout.
956.02Description: Service system board RIP card assembly cooling fan failure The RIP card assembly cooling fan is not functioning properly.
290.01Description: Scanner jam Remove all originals from the scanner. Sensor (sheet through) on jam After the first feed operation started, the feed drive motor turned on (CW)) in Duplex mode, the sensor (sheet through) did not turn on within the specified tim
244.01Description: Paper jam Check areas C, tray 4 Sensor (tray 3 feed-out) on jam (tray 4 media feed) The sensor (tray 3 feed-out) is not turned on within the specified time after the sensor (tray 4 feed-out) is turned on.