Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark MX812 Top Searches

These results are ranked by popularity.

Error
31.60...31.65Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet time-out 31.62 Imaging unit I2C packet has been sent, but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.6
202.03Description: The media is late reaching the sensor (fuser exit) within the specified time
121.25Description: After line voltage detection, control did not roll over to steady state control in time
900.xxDescription: RIP firmware errors
172.03...173.07Description: 172.03 Cartridge cooling fan took too long to ramp up 172.04 Cartridge cooling fan under speed or stalled during speed adjustment state 172.05 Cartridge cooling fan over speed during speed adjustment state 172.06 Cartridge cooling fan captur

Lexmark MX812 Common Errors

The most common error codes.

Error
31.60...31.65Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet time-out 31.62 Imaging unit I2C packet has been sent, but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.6
202.03Description: The media is late reaching the sensor (fuser exit) within the specified time
121.25Description: After line voltage detection, control did not roll over to steady state control in time
900.xxDescription: RIP firmware errors
172.03...173.07Description: 172.03 Cartridge cooling fan took too long to ramp up 172.04 Cartridge cooling fan under speed or stalled during speed adjustment state 172.05 Cartridge cooling fan over speed during speed adjustment state 172.06 Cartridge cooling fan captur
31.60...31.65Description: 31.60 Imaging unit smart chip error 31.61 Imaging unit I2C packet time-out 31.62 Imaging unit I2C packet has been sent, but code timed-out on receiving the data (callback) 31.63 Imaging unit security error in the send challenge sequence 31.6
202.03Description: The media is late reaching the sensor (fuser exit) within the specified time
121.25Description: After line voltage detection, control did not roll over to steady state control in time
900.xxDescription: RIP firmware errors
172.03...173.07Description: 172.03 Cartridge cooling fan took too long to ramp up 172.04 Cartridge cooling fan under speed or stalled during speed adjustment state 172.05 Cartridge cooling fan over speed during speed adjustment state 172.06 Cartridge cooling fan captur