These results are ranked by popularity.
Error | |
---|---|
280.11 | Description: Paper remains detected at the sensor (ADF 1st scan) after the printer is turned on. |
212.91 | Description: Paper remains detected at the sensor (deskew roller entry) after the printer is turned on. |
85 | Description: A developer unit end of life error was detected: • The developer unit life is low, nearly low, or very low. • The developer unit needs to be replaced. |
383.60...383.61 | Description: 383.60 The motor (staple unit carriage) did not turn on. 383.61 The motor (staple unit carriage) did not turn off. |
157.80...157.85 | Description: 157.80 The motor (M toner add) did not turn on. 157.81 The motor (M toner add) did not turn off. 157.82 The motor (M toner add) speed did not ramp up to the required level. 157.83 The motor (M toner add) stalled. 157.84 The motor (M toner ad |
The most common error codes.
Error | |
---|---|
280.11 | Description: Paper remains detected at the sensor (ADF 1st scan) after the printer is turned on. |
212.91 | Description: Paper remains detected at the sensor (deskew roller entry) after the printer is turned on. |
85 | Description: A developer unit end of life error was detected: • The developer unit life is low, nearly low, or very low. • The developer unit needs to be replaced. |
383.60...383.61 | Description: 383.60 The motor (staple unit carriage) did not turn on. 383.61 The motor (staple unit carriage) did not turn off. |
157.80...157.85 | Description: 157.80 The motor (M toner add) did not turn on. 157.81 The motor (M toner add) did not turn off. 157.82 The motor (M toner add) speed did not ramp up to the required level. 157.83 The motor (M toner add) stalled. 157.84 The motor (M toner ad |
280.11 | Description: Paper remains detected at the sensor (ADF 1st scan) after the printer is turned on. |
212.91 | Description: Paper remains detected at the sensor (deskew roller entry) after the printer is turned on. |
85 | Description: A developer unit end of life error was detected: • The developer unit life is low, nearly low, or very low. • The developer unit needs to be replaced. |
383.60...383.61 | Description: 383.60 The motor (staple unit carriage) did not turn on. 383.61 The motor (staple unit carriage) did not turn off. |
157.80...157.85 | Description: 157.80 The motor (M toner add) did not turn on. 157.81 The motor (M toner add) did not turn off. 157.82 The motor (M toner add) speed did not ramp up to the required level. 157.83 The motor (M toner add) stalled. 157.84 The motor (M toner ad |