Lexmark C748e Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Lexmark C748e Top Searches

These results are ranked by popularity.

Error
37Description: Insufficient memory for Flash Memory Defragment operation
920.17Description: POST Error Output bin cable not connected.
243.26Description: While feeding from a lower tray, tray 3 pass thru sensor is not made. Possible causes: • Incorrect paper loading for lower tray • Incorrect media restraint setting for lower tray • Paper tray 3 assembly failure • Lower tray 4 assembly fa
88.xxDescription: Cartridge Nearly Low
201.31Description: Paper is jammed between the inputsensor and the exit sensor during warm-up. Possible causes: • Damaged paper exit sensor or paper exit sensor flag. • Transport belt module failure. • Lower guide failure • Damaged fuser autoconnect. • Fa

Lexmark C748e Common Errors

The most common error codes.

Error
37Description: Insufficient memory for Flash Memory Defragment operation
920.17Description: POST Error Output bin cable not connected.
243.26Description: While feeding from a lower tray, tray 3 pass thru sensor is not made. Possible causes: • Incorrect paper loading for lower tray • Incorrect media restraint setting for lower tray • Paper tray 3 assembly failure • Lower tray 4 assembly fa
88.xxDescription: Cartridge Nearly Low
201.31Description: Paper is jammed between the inputsensor and the exit sensor during warm-up. Possible causes: • Damaged paper exit sensor or paper exit sensor flag. • Transport belt module failure. • Lower guide failure • Damaged fuser autoconnect. • Fa
37Description: Insufficient memory for Flash Memory Defragment operation
920.17Description: POST Error Output bin cable not connected.
243.26Description: While feeding from a lower tray, tray 3 pass thru sensor is not made. Possible causes: • Incorrect paper loading for lower tray • Incorrect media restraint setting for lower tray • Paper tray 3 assembly failure • Lower tray 4 assembly fa
88.xxDescription: Cartridge Nearly Low
201.31Description: Paper is jammed between the inputsensor and the exit sensor during warm-up. Possible causes: • Damaged paper exit sensor or paper exit sensor flag. • Transport belt module failure. • Lower guide failure • Damaged fuser autoconnect. • Fa