Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera ECOSYS P4040dn Top Searches

These results are ranked by popularity.

Error
2620Description: PF drive motor 3 error (paper feeder 3) When the PF drive motor is driven, error signal is detected continuously for 5 s.
7800Description: Broken external thermistor wire The average of thermistor output value of 930 or more.
1010Description: Lift motor error After cassette 1 is inserted, lift sensor does not turn on within 10 s. This error is detected five times successively.
1920Description: Paper feeder 3 EEPROM error When writing the data, the write data and the read data is not in agreement.
6000Description: Broken fuser heater wire The detection temperature of fuser thermistor 2 is 100 °C/ 212°F or less after the fuser heater lamp has been turned on continuously for 30 s.

Kyocera ECOSYS P4040dn Common Errors

The most common error codes.

Error
2620Description: PF drive motor 3 error (paper feeder 3) When the PF drive motor is driven, error signal is detected continuously for 5 s.
7800Description: Broken external thermistor wire The average of thermistor output value of 930 or more.
1010Description: Lift motor error After cassette 1 is inserted, lift sensor does not turn on within 10 s. This error is detected five times successively.
1920Description: Paper feeder 3 EEPROM error When writing the data, the write data and the read data is not in agreement.
6000Description: Broken fuser heater wire The detection temperature of fuser thermistor 2 is 100 °C/ 212°F or less after the fuser heater lamp has been turned on continuously for 30 s.
2620Description: PF drive motor 3 error (paper feeder 3) When the PF drive motor is driven, error signal is detected continuously for 5 s.
7800Description: Broken external thermistor wire The average of thermistor output value of 930 or more.
1010Description: Lift motor error After cassette 1 is inserted, lift sensor does not turn on within 10 s. This error is detected five times successively.
1920Description: Paper feeder 3 EEPROM error When writing the data, the write data and the read data is not in agreement.
6000Description: Broken fuser heater wire The detection temperature of fuser thermistor 2 is 100 °C/ 212°F or less after the fuser heater lamp has been turned on continuously for 30 s.