Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KM2540 Top Searches

These results are ranked by popularity.

Error
C0820Description: Fax control PWB CG ROM checksum error (optional fax) A checksum error occurred with the CG ROM data of the fax control PWB.
C8140Description: Tray elevation motor problem (optional document finisher) When the tray elevation motor is driving, the ON status of the tray lower limit sensor or surface view sensor cannot be detected even if 20 s passed.
C0030Description: Fax control PWB system problem (optional fax) Processing with the fax software was disabled due to a hardware or software problem.
C2600Description: Paper feeder drive motor error (optional paper feeder) The lock signal of the motor is detected avobe 500 ms.
F000Description: Operation panel PWB communication error

Kyocera KM2540 Common Errors

The most common error codes.

Error
C0820Description: Fax control PWB CG ROM checksum error (optional fax) A checksum error occurred with the CG ROM data of the fax control PWB.
C8140Description: Tray elevation motor problem (optional document finisher) When the tray elevation motor is driving, the ON status of the tray lower limit sensor or surface view sensor cannot be detected even if 20 s passed.
C0030Description: Fax control PWB system problem (optional fax) Processing with the fax software was disabled due to a hardware or software problem.
C2600Description: Paper feeder drive motor error (optional paper feeder) The lock signal of the motor is detected avobe 500 ms.
F000Description: Operation panel PWB communication error
C0820Description: Fax control PWB CG ROM checksum error (optional fax) A checksum error occurred with the CG ROM data of the fax control PWB.
C8140Description: Tray elevation motor problem (optional document finisher) When the tray elevation motor is driving, the ON status of the tray lower limit sensor or surface view sensor cannot be detected even if 20 s passed.
F000Description: Operation panel PWB communication error
C0030Description: Fax control PWB system problem (optional fax) Processing with the fax software was disabled due to a hardware or software problem.
C8440Description: Sensor adjusting problem (optional document finisher) The sensor cannot be adjusted within the specified range.