Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera KM2050 Top Searches

These results are ranked by popularity.

Error
C0800Description: Image processing problem • JAM05 is detected twice.
C4200Description: BD steady-state problem • The MIP detects a BD error for 600 ms after the polygon motor rotation has been stabilized.
C3200Description: Exposure lamp problem • Non-lighting of the exposure lamp is detected at the beginning of copying.
C0030Description: Fax control PCBsystem problem • Processing with the fax software was disabled due to a hardware or software problem.
C0240Description: Printer board PCB communication problem • The printer board PCB does not re-spond 120 s after the power is turned on.

Kyocera KM2050 Common Errors

The most common error codes.

Error
C0800Description: Image processing problem • JAM05 is detected twice.
C4200Description: BD steady-state problem • The MIP detects a BD error for 600 ms after the polygon motor rotation has been stabilized.
C3200Description: Exposure lamp problem • Non-lighting of the exposure lamp is detected at the beginning of copying.
C0030Description: Fax control PCBsystem problem • Processing with the fax software was disabled due to a hardware or software problem.
C0240Description: Printer board PCB communication problem • The printer board PCB does not re-spond 120 s after the power is turned on.
C0800Description: Image processing problem • JAM05 is detected twice.
C4200Description: BD steady-state problem • The MIP detects a BD error for 600 ms after the polygon motor rotation has been stabilized.
C3200Description: Exposure lamp problem • Non-lighting of the exposure lamp is detected at the beginning of copying.
C0030Description: Fax control PCBsystem problem • Processing with the fax software was disabled due to a hardware or software problem.
C0240Description: Printer board PCB communication problem • The printer board PCB does not re-spond 120 s after the power is turned on.