Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FSC5016N Top Searches

These results are ranked by popularity.

Error
6130Description: Fuser thermistor 2 broken error (press roller) • It was judged it has been broken from the fact that it is not the input signal from of the fuser thermistor 2 which detects the fuser temperature of the press roller.P
7412Description: Cyan drum unit non- installing error • The EEPROM (U401) on the drum PWB 2 (KP-972) inside the cyan drum unit does not communicate normally.
F000Description: Operation panel PWB communication error • The operation panel PWB (KP-962) does not communicate to the main controller PWB (KP-957) normally 30 seconds.
0100Description: EEPROM (U12) write error • When it cannot make normal to access to the EEPROM (U12) which is installed in the socket of the engine controller PWB (KP-1054). (The total counter, serial number and engine parameter etc. are stored in the EEPROM
m6Description: The paper size is not recognized as the size set with the paper size dial.

Kyocera FSC5016N Common Errors

The most common error codes.

Error
6130Description: Fuser thermistor 2 broken error (press roller) • It was judged it has been broken from the fact that it is not the input signal from of the fuser thermistor 2 which detects the fuser temperature of the press roller.P
7412Description: Cyan drum unit non- installing error • The EEPROM (U401) on the drum PWB 2 (KP-972) inside the cyan drum unit does not communicate normally.
F000Description: Operation panel PWB communication error • The operation panel PWB (KP-962) does not communicate to the main controller PWB (KP-957) normally 30 seconds.
0100Description: EEPROM (U12) write error • When it cannot make normal to access to the EEPROM (U12) which is installed in the socket of the engine controller PWB (KP-1054). (The total counter, serial number and engine parameter etc. are stored in the EEPROM
m6Description: The paper size is not recognized as the size set with the paper size dial.
6130Description: Fuser thermistor 2 broken error (press roller) • It was judged it has been broken from the fact that it is not the input signal from of the fuser thermistor 2 which detects the fuser temperature of the press roller.P
7412Description: Cyan drum unit non- installing error • The EEPROM (U401) on the drum PWB 2 (KP-972) inside the cyan drum unit does not communicate normally.
F000Description: Operation panel PWB communication error • The operation panel PWB (KP-962) does not communicate to the main controller PWB (KP-957) normally 30 seconds.
0100Description: EEPROM (U12) write error • When it cannot make normal to access to the EEPROM (U12) which is installed in the socket of the engine controller PWB (KP-1054). (The total counter, serial number and engine parameter etc. are stored in the EEPROM
m6Description: The paper size is not recognized as the size set with the paper size dial.