These results are ranked by popularity.
Error | |
---|---|
4200 | Description: BD stability error The BD signal is not detected for 1000 ms after processing the compulsion lighting. At the interrupt in VSYNC, the BD error is detected continuously for 10 times in 400 ms intervals. |
0030 | Description: FAX Board System Error Cannot communicate with the modem when activated. |
6000 | Description: Broken fuser heater The temperature does not reach 100° C/212 °F after the fuser heater lamp has been turned on continuously for 30 s. At the time of 20 degrees or less from specified temperature, the fuser temperature does not rise by 2 deg |
0100 | Description: Backup memory read/write error(NOR) Flash returns an abnormal status. |
6020 | Description: Abnormally high fuser thermistor temperature Fuser thermistor detects a temperature higher than 210°C/410°F for 3 s |
The most common error codes.
Error | |
---|---|
4200 | Description: BD stability error The BD signal is not detected for 1000 ms after processing the compulsion lighting. At the interrupt in VSYNC, the BD error is detected continuously for 10 times in 400 ms intervals. |
0030 | Description: FAX Board System Error Cannot communicate with the modem when activated. |
6000 | Description: Broken fuser heater The temperature does not reach 100° C/212 °F after the fuser heater lamp has been turned on continuously for 30 s. At the time of 20 degrees or less from specified temperature, the fuser temperature does not rise by 2 deg |
0100 | Description: Backup memory read/write error(NOR) Flash returns an abnormal status. |
6020 | Description: Abnormally high fuser thermistor temperature Fuser thermistor detects a temperature higher than 210°C/410°F for 3 s |
4200 | Description: BD stability error The BD signal is not detected for 1000 ms after processing the compulsion lighting. At the interrupt in VSYNC, the BD error is detected continuously for 10 times in 400 ms intervals. |
0030 | Description: FAX Board System Error Cannot communicate with the modem when activated. |
6000 | Description: Broken fuser heater The temperature does not reach 100° C/212 °F after the fuser heater lamp has been turned on continuously for 30 s. At the time of 20 degrees or less from specified temperature, the fuser temperature does not rise by 2 deg |
0100 | Description: Backup memory read/write error(NOR) Flash returns an abnormal status. |
6020 | Description: Abnormally high fuser thermistor temperature Fuser thermistor detects a temperature higher than 210°C/410°F for 3 s |