Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera FS1020MFP Top Searches

These results are ranked by popularity.

Error
4200Description: BD stability error The BD signal is not detected for 1000 ms after processing the compulsion lighting. At the interrupt in VSYNC, the BD error is detected continuously for 10 times in 400 ms intervals.
0030Description: FAX Board System Error Cannot communicate with the modem when activated.
6000Description: Broken fuser heater The temperature does not reach 100° C/212 °F after the fuser heater lamp has been turned on continuously for 30 s. At the time of 20 degrees or less from specified temperature, the fuser temperature does not rise by 2 deg
0100Description: Backup memory read/write error(NOR) Flash returns an abnormal status.
6020Description: Abnormally high fuser thermistor temperature Fuser thermistor detects a temperature higher than 210°C/410°F for 3 s

Kyocera FS1020MFP Common Errors

The most common error codes.

Error
4200Description: BD stability error The BD signal is not detected for 1000 ms after processing the compulsion lighting. At the interrupt in VSYNC, the BD error is detected continuously for 10 times in 400 ms intervals.
0030Description: FAX Board System Error Cannot communicate with the modem when activated.
6000Description: Broken fuser heater The temperature does not reach 100° C/212 °F after the fuser heater lamp has been turned on continuously for 30 s. At the time of 20 degrees or less from specified temperature, the fuser temperature does not rise by 2 deg
0100Description: Backup memory read/write error(NOR) Flash returns an abnormal status.
6020Description: Abnormally high fuser thermistor temperature Fuser thermistor detects a temperature higher than 210°C/410°F for 3 s
4200Description: BD stability error The BD signal is not detected for 1000 ms after processing the compulsion lighting. At the interrupt in VSYNC, the BD error is detected continuously for 10 times in 400 ms intervals.
0030Description: FAX Board System Error Cannot communicate with the modem when activated.
6000Description: Broken fuser heater The temperature does not reach 100° C/212 °F after the fuser heater lamp has been turned on continuously for 30 s. At the time of 20 degrees or less from specified temperature, the fuser temperature does not rise by 2 deg
0100Description: Backup memory read/write error(NOR) Flash returns an abnormal status.
6020Description: Abnormally high fuser thermistor temperature Fuser thermistor detects a temperature higher than 210°C/410°F for 3 s