Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 7550ci Top Searches

These results are ranked by popularity.

Error
3800Description: AFE error When writing the data, read and write data does not match 3 times in succession.
1010Description: Lift motor 1 error After cassette 1 is inserted, lift sensor 1 does not turn on within 12 s. This error is detected 4 times successively. The lock signal of the motor is detected continuously for 1 s.
7223Description: Broken LSU thermistor M wire The sensor input sampling is greater than 230.
7942Description: Laser scanner unit C EEPROM error Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively.
6250Description: Abnormally low fuser thermistor 2 temperature Fuser thermistor 2 detects a temperature lower than 50°C/ 122°F for 1 s after warming up.

Kyocera TASKalfa 7550ci Common Errors

The most common error codes.

Error
3800Description: AFE error When writing the data, read and write data does not match 3 times in succession.
1010Description: Lift motor 1 error After cassette 1 is inserted, lift sensor 1 does not turn on within 12 s. This error is detected 4 times successively. The lock signal of the motor is detected continuously for 1 s.
7223Description: Broken LSU thermistor M wire The sensor input sampling is greater than 230.
7942Description: Laser scanner unit C EEPROM error Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively.
6250Description: Abnormally low fuser thermistor 2 temperature Fuser thermistor 2 detects a temperature lower than 50°C/ 122°F for 1 s after warming up.
3800Description: AFE error When writing the data, read and write data does not match 3 times in succession.
1010Description: Lift motor 1 error After cassette 1 is inserted, lift sensor 1 does not turn on within 12 s. This error is detected 4 times successively. The lock signal of the motor is detected continuously for 1 s.
7223Description: Broken LSU thermistor M wire The sensor input sampling is greater than 230.
7942Description: Laser scanner unit C EEPROM error Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively.
6250Description: Abnormally low fuser thermistor 2 temperature Fuser thermistor 2 detects a temperature lower than 50°C/ 122°F for 1 s after warming up.