Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 4550ci Top Searches

These results are ranked by popularity.

Error
4101Description: BD initialization error K After polygon motor K is driven, ASIC detects a BD error for 1 s.
8240Description: DF staple motor error 2 The lock signal of the motor is detected continuously for 500 ms.
1010Description: Lift motor 1 error After cassette 1 is inserted, lift sensor 1 does not turn on within 12 s. This error is detected 4 times successively. The lock signal of the motor is detected continuously for 1 s.
6780Description: Fuser IH input over-voltage error The input voltage is greater than 140V for 200 ms in succession.
2550Description: Paper feed motor error After paper feed motor is driven, the ready signal does not turn to L within 2 s. After paper feed motor is stabilized, the ready signal is at the H level for 1 s continuously.

Kyocera TASKalfa 4550ci Common Errors

The most common error codes.

Error
4101Description: BD initialization error K After polygon motor K is driven, ASIC detects a BD error for 1 s.
8240Description: DF staple motor error 2 The lock signal of the motor is detected continuously for 500 ms.
1010Description: Lift motor 1 error After cassette 1 is inserted, lift sensor 1 does not turn on within 12 s. This error is detected 4 times successively. The lock signal of the motor is detected continuously for 1 s.
6780Description: Fuser IH input over-voltage error The input voltage is greater than 140V for 200 ms in succession.
2550Description: Paper feed motor error After paper feed motor is driven, the ready signal does not turn to L within 2 s. After paper feed motor is stabilized, the ready signal is at the H level for 1 s continuously.
7402Description: Developer unit C type mismatch error Absence of the developer unit C is detected.
2550Description: Paper feed motor error After paper feed motor is driven, the ready signal does not turn to L within 2 s. After paper feed motor is stabilized, the ready signal is at the H level for 1 s continuously.
1010Description: Lift motor 1 error After cassette 1 is inserted, lift sensor 1 does not turn on within 12 s. This error is detected 4 times successively. The lock signal of the motor is detected continuously for 1 s.
8240Description: DF staple motor error 2 The lock signal of the motor is detected continuously for 500 ms.
6780Description: Fuser IH input over-voltage error The input voltage is greater than 140V for 200 ms in succession.