Select an Error Code or Type an Error Code to begin searching
| Error |
|---|
| Error |
|---|
These results are ranked by popularity.
| Error | |
|---|---|
| 2101 | Description: Developer motor error After developer motor is driven, the ready signal does not turn to L within 5 s. After developer motor is stabilized, the ready signal is at the H level for 5 s continuously. |
| 7001 | Description: Toner motor error A state in which the lock signal is detected for 20 times has been detected 3 times during the toner motor is activated. |
| F010 | Description: Main PWB checksum error |
| 8240 | Description: DF staple motor error 2 The lock signal of the motor is detected continuously for 500 ms. |
| 3600 | Description: Scanner sequence error |
The most common error codes.
| Error | |
|---|---|
| 2101 | Description: Developer motor error After developer motor is driven, the ready signal does not turn to L within 5 s. After developer motor is stabilized, the ready signal is at the H level for 5 s continuously. |
| 7001 | Description: Toner motor error A state in which the lock signal is detected for 20 times has been detected 3 times during the toner motor is activated. |
| F010 | Description: Main PWB checksum error |
| 8240 | Description: DF staple motor error 2 The lock signal of the motor is detected continuously for 500 ms. |
| 3600 | Description: Scanner sequence error |
| 2101 | Description: Developer motor error After developer motor is driven, the ready signal does not turn to L within 5 s. After developer motor is stabilized, the ready signal is at the H level for 5 s continuously. |
| 7001 | Description: Toner motor error A state in which the lock signal is detected for 20 times has been detected 3 times during the toner motor is activated. |
| F010 | Description: Main PWB checksum error |
| 8240 | Description: DF staple motor error 2 The lock signal of the motor is detected continuously for 500 ms. |
| 3600 | Description: Scanner sequence error |