Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Kyocera TASKalfa 3511i Top Searches

These results are ranked by popularity.

Error
9110Description: Coin vender rejector error Communication error has been detected in connection with the coin mec and the rejector.
2000Description: Main motor steady-state error After main motor is stabilized, the ready signal is at the H level for 2 s continuously.
8020Description: Punch motor 2 error Home position is not obtained in 3 s after home position is initialized or in standby.
0180Description: Machine number mismatch Machine number of main and engine does not match.
F040Description: Communication error between Main PWB and Print engine

Kyocera TASKalfa 3511i Common Errors

The most common error codes.

Error
9110Description: Coin vender rejector error Communication error has been detected in connection with the coin mec and the rejector.
2000Description: Main motor steady-state error After main motor is stabilized, the ready signal is at the H level for 2 s continuously.
8020Description: Punch motor 2 error Home position is not obtained in 3 s after home position is initialized or in standby.
0180Description: Machine number mismatch Machine number of main and engine does not match.
F040Description: Communication error between Main PWB and Print engine
2000Description: Main motor steady-state error After main motor is stabilized, the ready signal is at the H level for 2 s continuously.
9110Description: Coin vender rejector error Communication error has been detected in connection with the coin mec and the rejector.
8020Description: Punch motor 2 error Home position is not obtained in 3 s after home position is initialized or in standby.
0180Description: Machine number mismatch Machine number of main and engine does not match.
8230Description: DF staple motor error 1 Staple JAM (DF) has been detected twice in a row. (The second JAM detection condition fullfilled with the home position did not detected in 600 ms after the motor was driven.)