Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub C10 Top Searches

These results are ranked by popularity.

Error
12HDescription: Laser malfunction • The SOS signal is not detected within a predetermined period of time after the output of a laser has been started. • The SOS signal is never detected in the image area.
24HDescription: Faulty fusing thermistor resistor • The heater lamp remains ON for a predetermined consecutive period of time.
14HDescription: 2nd image transfer pressure /retraction failure • The state of the retraction position sensor/2nd image transfer is not changed from the unblocked to blocked state even after the lapse of a predetermined period of time during predrive. •
29H, 2AH. 2BH, 2CHDescription: Trouble related to security • Contact the responsible people of KONICA MINOLTA when not returning in power switch OFF/ON.
04HDescription: Printer control board malfunction • Communications with the M/C expansion IO G/A (IC on the printer control board) are not properly carried out.

Konica-Minolta Bizhub C10 Common Errors

The most common error codes.

Error
12HDescription: Laser malfunction • The SOS signal is not detected within a predetermined period of time after the output of a laser has been started. • The SOS signal is never detected in the image area.
24HDescription: Faulty fusing thermistor resistor • The heater lamp remains ON for a predetermined consecutive period of time.
14HDescription: 2nd image transfer pressure /retraction failure • The state of the retraction position sensor/2nd image transfer is not changed from the unblocked to blocked state even after the lapse of a predetermined period of time during predrive. •
29H, 2AH. 2BH, 2CHDescription: Trouble related to security • Contact the responsible people of KONICA MINOLTA when not returning in power switch OFF/ON.
04HDescription: Printer control board malfunction • Communications with the M/C expansion IO G/A (IC on the printer control board) are not properly carried out.
12HDescription: Laser malfunction • The SOS signal is not detected within a predetermined period of time after the output of a laser has been started. • The SOS signal is never detected in the image area.
24HDescription: Faulty fusing thermistor resistor • The heater lamp remains ON for a predetermined consecutive period of time.
14HDescription: 2nd image transfer pressure /retraction failure • The state of the retraction position sensor/2nd image transfer is not changed from the unblocked to blocked state even after the lapse of a predetermined period of time during predrive. •
29H, 2AH. 2BH, 2CHDescription: Trouble related to security • Contact the responsible people of KONICA MINOLTA when not returning in power switch OFF/ON.
04HDescription: Printer control board malfunction • Communications with the M/C expansion IO G/A (IC on the printer control board) are not properly carried out.