Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 600 Top Searches

These results are ranked by popularity.

Error
C-2701Description: The charging ON/OFF operation is repeated five times after an error detection signal of the charging is detected when the charging is ON.
C-C111Description: After ISW, the firmware of the main body does not match that of the printer.
C-1107Description: The clincher rotation motor (M4) does not reach HP within a specified period of time after it starts its operation. Or, it does not pass through HP within a specified period of time after it starts its skew rotation.
C-5013Description: ADU drive communication abnormality. The communication data with ID=8-10 is not received within a specified period of time after the initial communication is established.
C-6709Description: The adjustment data evacuated by resolutions is not available.

Konica-Minolta Bizhub 600 Common Errors

The most common error codes.

Error
C-2701Description: The charging ON/OFF operation is repeated five times after an error detection signal of the charging is detected when the charging is ON.
C-C111Description: After ISW, the firmware of the main body does not match that of the printer.
C-1107Description: The clincher rotation motor (M4) does not reach HP within a specified period of time after it starts its operation. Or, it does not pass through HP within a specified period of time after it starts its skew rotation.
C-5013Description: ADU drive communication abnormality. The communication data with ID=8-10 is not received within a specified period of time after the initial communication is established.
C-6709Description: The adjustment data evacuated by resolutions is not available.
C-2701Description: The charging ON/OFF operation is repeated five times after an error detection signal of the charging is detected when the charging is ON.
C-C111Description: After ISW, the firmware of the main body does not match that of the printer.
C-1107Description: The clincher rotation motor (M4) does not reach HP within a specified period of time after it starts its operation. Or, it does not pass through HP within a specified period of time after it starts its skew rotation.
C-5013Description: ADU drive communication abnormality. The communication data with ID=8-10 is not received within a specified period of time after the initial communication is established.
C-6709Description: The adjustment data evacuated by resolutions is not available.