Konica-Minolta Bizhub 501 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Konica-Minolta Bizhub 501 Top Searches

These results are ranked by popularity.

Error
C-1121Description: PU: Punch motor (M1) drive abnormality. - The punch position sensors /1 (PS2) and /2 (PS3) do not turn OFF within a specified period of time after M1 turns ON.
C-3904Description: Thermistor /2 (TH2) open abnormality (sub CPU detection) - In the sub CPU, the TH2 detection temperature detects a temperature between -8 and 20 °C for more than a specified period of time.
C-2803 E3Description: TCR output abnormality. - When the output ripple voltage of the TCR sensor (TCRS) is 0.5 V or less.
C-6003Description: Communication abnormality between the engine control of the overall control board (OACB) and that of the printer control board (PRCB). Time out for the notice time of the platen original size.
C-1003Description: FS-522 - Flash ROM abnormality. A checksum error of the flash ROM is detected.

Konica-Minolta Bizhub 501 Common Errors

The most common error codes.

Error
C-1121Description: PU: Punch motor (M1) drive abnormality. - The punch position sensors /1 (PS2) and /2 (PS3) do not turn OFF within a specified period of time after M1 turns ON.
C-3904Description: Thermistor /2 (TH2) open abnormality (sub CPU detection) - In the sub CPU, the TH2 detection temperature detects a temperature between -8 and 20 °C for more than a specified period of time.
C-2803 E3Description: TCR output abnormality. - When the output ripple voltage of the TCR sensor (TCRS) is 0.5 V or less.
C-6003Description: Communication abnormality between the engine control of the overall control board (OACB) and that of the printer control board (PRCB). Time out for the notice time of the platen original size.
C-1003Description: FS-522 - Flash ROM abnormality. A checksum error of the flash ROM is detected.
C-1121Description: PU: Punch motor (M1) drive abnormality. - The punch position sensors /1 (PS2) and /2 (PS3) do not turn OFF within a specified period of time after M1 turns ON.
C-3904Description: Thermistor /2 (TH2) open abnormality (sub CPU detection) - In the sub CPU, the TH2 detection temperature detects a temperature between -8 and 20 °C for more than a specified period of time.
C-2803 E3Description: TCR output abnormality. - When the output ripple voltage of the TCR sensor (TCRS) is 0.5 V or less.
C-6003Description: Communication abnormality between the engine control of the overall control board (OACB) and that of the printer control board (PRCB). Time out for the notice time of the platen original size.
C-1003Description: FS-522 - Flash ROM abnormality. A checksum error of the flash ROM is detected.