'

Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson SC-T5000 Top Searches

These results are ranked by popularity.

Error
1A50Description: I2C communication error (Between elements on ASIC and MAIN) An I2C communication error has occurred in the MAIN BOARD
153EDescription: Velocity deviation error The PRESSURE ROLLER MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration.• Irregular load• PRESSURE ROLLER MOTOR encoder failure• PRESSURE ROLLER MOTOR failure• P
122Description: Reversing error The number of occurrences of reversing the PF MOTOR has reached a predetermined limit.• The polarity of PF ENCODER cable is opposite.• The polarity of PF MOTOR cable is opposite.• Slipping of the teeth of PF TIMING BELT• PF E
141Description: Reversing error The number of occurrences of reversing the pump motor has reached a predetermined limit.• The polarity of pump motor encoder cable is opposite.• The polarity of pump motor cable is opposite.
2000Description: NVRAM error NVRAM erase or write error has occurred.

Epson SC-T5000 Common Errors

The most common error codes.

Error
1A50Description: I2C communication error (Between elements on ASIC and MAIN) An I2C communication error has occurred in the MAIN BOARD
153EDescription: Velocity deviation error The PRESSURE ROLLER MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration.• Irregular load• PRESSURE ROLLER MOTOR encoder failure• PRESSURE ROLLER MOTOR failure• P
122Description: Reversing error The number of occurrences of reversing the PF MOTOR has reached a predetermined limit.• The polarity of PF ENCODER cable is opposite.• The polarity of PF MOTOR cable is opposite.• Slipping of the teeth of PF TIMING BELT• PF E
141Description: Reversing error The number of occurrences of reversing the pump motor has reached a predetermined limit.• The polarity of pump motor encoder cable is opposite.• The polarity of pump motor cable is opposite.
2000Description: NVRAM error NVRAM erase or write error has occurred.
1A50Description: I2C communication error (Between elements on ASIC and MAIN) An I2C communication error has occurred in the MAIN BOARD
153EDescription: Velocity deviation error The PRESSURE ROLLER MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration.• Irregular load• PRESSURE ROLLER MOTOR encoder failure• PRESSURE ROLLER MOTOR failure• P
122Description: Reversing error The number of occurrences of reversing the PF MOTOR has reached a predetermined limit.• The polarity of PF ENCODER cable is opposite.• The polarity of PF MOTOR cable is opposite.• Slipping of the teeth of PF TIMING BELT• PF E
141Description: Reversing error The number of occurrences of reversing the pump motor has reached a predetermined limit.• The polarity of pump motor encoder cable is opposite.• The polarity of pump motor cable is opposite.
2000Description: NVRAM error NVRAM erase or write error has occurred.