These results are ranked by popularity.
| Error | |
|---|---|
| 1614 | Description: Reel Unit undetectable error at the start of operation When the Reel Motor started to operate, it was detected that the Reel Unit status is different from that detected during mechanism initialization process. |
| 1432 | Description: IC Holder life error The IC Holder has reached the end of its service life. (The total number of times that the holder was removed from the printer has reached a predetermined limit) |
| 1139 | Description: CR Motor oscillation error The control terminal (Vre terminal) of the CR Motor driver has shorted out. |
| 1F80 ... 1FC1 | Description: CSIC error |
| 122F | Description: PF Motor lock error The PF Motor was driven at a speed abnormally slower than a predetermined one during operation.• CR Encoder cable disconnection• CR Motor cable disconnection• Irregular load• PF Encoder failure• PF Motor failure |
The most common error codes.
| Error | |
|---|---|
| 1614 | Description: Reel Unit undetectable error at the start of operation When the Reel Motor started to operate, it was detected that the Reel Unit status is different from that detected during mechanism initialization process. |
| 1432 | Description: IC Holder life error The IC Holder has reached the end of its service life. (The total number of times that the holder was removed from the printer has reached a predetermined limit) |
| 1139 | Description: CR Motor oscillation error The control terminal (Vre terminal) of the CR Motor driver has shorted out. |
| 1F80 ... 1FC1 | Description: CSIC error |
| 122F | Description: PF Motor lock error The PF Motor was driven at a speed abnormally slower than a predetermined one during operation.• CR Encoder cable disconnection• CR Motor cable disconnection• Irregular load• PF Encoder failure• PF Motor failure |
| 1614 | Description: Reel Unit undetectable error at the start of operation When the Reel Motor started to operate, it was detected that the Reel Unit status is different from that detected during mechanism initialization process. |
| 1432 | Description: IC Holder life error The IC Holder has reached the end of its service life. (The total number of times that the holder was removed from the printer has reached a predetermined limit) |
| 1139 | Description: CR Motor oscillation error The control terminal (Vre terminal) of the CR Motor driver has shorted out. |
| 1F80 ... 1FC1 | Description: CSIC error |
| 122F | Description: PF Motor lock error The PF Motor was driven at a speed abnormally slower than a predetermined one during operation.• CR Encoder cable disconnection• CR Motor cable disconnection• Irregular load• PF Encoder failure• PF Motor failure |
