'

Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson SC-S50610 Top Searches

These results are ranked by popularity.

Error
1A37Description: Thermistor error • The Head FFC is not connected correctly.• A temperature out of a predetermined range was detected by the Head thermistor.• Head thermistor failure
15AADescription: Reel Motor overload error Overcurrent to the Reel Motor was detected.• Reel Motor cable disconnection.• Irregular load• Reel Motor encoder failure• Reel Motor failure
141BDescription: Pump Motor over speed error The Pump Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• Pump Motor encoder failure• Pump Motor driver failureer failure
1620Description: Pressurizing initialization error The initialization process did not complete within a predetermined time period.
1615Description: Reel Unit undetectable error during operation The connector of the Reel Unit was disconnected during the Reel Motor was operating.

Epson SC-S50610 Common Errors

The most common error codes.

Error
1A37Description: Thermistor error • The Head FFC is not connected correctly.• A temperature out of a predetermined range was detected by the Head thermistor.• Head thermistor failure
15AADescription: Reel Motor overload error Overcurrent to the Reel Motor was detected.• Reel Motor cable disconnection.• Irregular load• Reel Motor encoder failure• Reel Motor failure
141BDescription: Pump Motor over speed error The Pump Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• Pump Motor encoder failure• Pump Motor driver failureer failure
1620Description: Pressurizing initialization error The initialization process did not complete within a predetermined time period.
1615Description: Reel Unit undetectable error during operation The connector of the Reel Unit was disconnected during the Reel Motor was operating.
1A37Description: Thermistor error • The Head FFC is not connected correctly.• A temperature out of a predetermined range was detected by the Head thermistor.• Head thermistor failure
15AADescription: Reel Motor overload error Overcurrent to the Reel Motor was detected.• Reel Motor cable disconnection.• Irregular load• Reel Motor encoder failure• Reel Motor failure
141BDescription: Pump Motor over speed error The Pump Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• Pump Motor encoder failure• Pump Motor driver failureer failure
1620Description: Pressurizing initialization error The initialization process did not complete within a predetermined time period.
1615Description: Reel Unit undetectable error during operation The connector of the Reel Unit was disconnected during the Reel Motor was operating.