These results are ranked by popularity.
| Error | |
|---|---|
| 1618 | Description: Roll/Reel Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board. |
| 113B | Description: CR Motor over speed error The CR Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• CR Encoder failure• SUB Board is damaged.• CR Motor driver failure |
| 159A | Description: ATC Motor overload error Overcurrent to the ATC Motor was detected.• ATC Motor cable disconnection.• Irregular load• ATC Motor encoder failure• ATC Motor failure |
| 1A39 | Description: Head error • Connection failure of the Head FFC.• Electric parts or components are damaged due to improper Head FFC connection such as connecting it at an angle.• The drive circuit in the Print Head is damaged.• The fuse of the Main Board ha |
| 1411 | Description: Pump Cap Unit undetectable error Pump Cap Unit failure |
The most common error codes.
| Error | |
|---|---|
| 1618 | Description: Roll/Reel Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board. |
| 113B | Description: CR Motor over speed error The CR Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• CR Encoder failure• SUB Board is damaged.• CR Motor driver failure |
| 159A | Description: ATC Motor overload error Overcurrent to the ATC Motor was detected.• ATC Motor cable disconnection.• Irregular load• ATC Motor encoder failure• ATC Motor failure |
| 1A39 | Description: Head error • Connection failure of the Head FFC.• Electric parts or components are damaged due to improper Head FFC connection such as connecting it at an angle.• The drive circuit in the Print Head is damaged.• The fuse of the Main Board ha |
| 1411 | Description: Pump Cap Unit undetectable error Pump Cap Unit failure |
| 1618 | Description: Roll/Reel Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board. |
| 113B | Description: CR Motor over speed error The CR Motor was driven at a speed faster than a predetermined one during deceleration.• Irregular load• CR Encoder failure• SUB Board is damaged.• CR Motor driver failure |
| 159A | Description: ATC Motor overload error Overcurrent to the ATC Motor was detected.• ATC Motor cable disconnection.• Irregular load• ATC Motor encoder failure• ATC Motor failure |
| 1A39 | Description: Head error • Connection failure of the Head FFC.• Electric parts or components are damaged due to improper Head FFC connection such as connecting it at an angle.• The drive circuit in the Print Head is damaged.• The fuse of the Main Board ha |
| 1411 | Description: Pump Cap Unit undetectable error Pump Cap Unit failure |
