These results are ranked by popularity.
Error | |
---|---|
1548 | Description: Oscillation error The control terminal (Vre terminal) of the cutter motor driver has shorted out. |
131B | Description: Head driver (transmission gate) overheat error The temperature of the Head driver rises, and has reached a predetermined limit. |
1A72 | Description: MAIN-B BOARD system error (Core1) |
200A | Description: F/W load error Reading/decompressing the firmware has failed. |
159A | Description: Overload error Overcurrent to the ATC MOTOR was detected.• ATC MOTOR cable disconnection.• Irregular load• ATC MOTOR encoder failure• ATC MOTOR failure |
The most common error codes.
Error | |
---|---|
1548 | Description: Oscillation error The control terminal (Vre terminal) of the cutter motor driver has shorted out. |
131B | Description: Head driver (transmission gate) overheat error The temperature of the Head driver rises, and has reached a predetermined limit. |
1A72 | Description: MAIN-B BOARD system error (Core1) |
200A | Description: F/W load error Reading/decompressing the firmware has failed. |
159A | Description: Overload error Overcurrent to the ATC MOTOR was detected.• ATC MOTOR cable disconnection.• Irregular load• ATC MOTOR encoder failure• ATC MOTOR failure |
1548 | Description: Oscillation error The control terminal (Vre terminal) of the cutter motor driver has shorted out. |
131B | Description: Head driver (transmission gate) overheat error The temperature of the Head driver rises, and has reached a predetermined limit. |
1A72 | Description: MAIN-B BOARD system error (Core1) |
200A | Description: F/W load error Reading/decompressing the firmware has failed. |
159A | Description: Overload error Overcurrent to the ATC MOTOR was detected.• ATC MOTOR cable disconnection.• Irregular load• ATC MOTOR encoder failure• ATC MOTOR failure |