'

Epson SC-B6070 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson SC-B6070 Top Searches

These results are ranked by popularity.

Error
1548Description: Oscillation error The control terminal (Vre terminal) of the cutter motor driver has shorted out.
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred.
113DDescription: Driving time-out error Abnormally-long driving duration of the CR MOTOR was detected.• Irregular load• Firmware becomes out of control.
1A26Description: RTC Access T/O error The RTC circuit on the MAIN BOARD malfunctions
1412Description: Pump life error The number of PUMP CAP UNIT operation has reached the specified limit. (The rotation of the pump motor has reached the specified limit.)

Epson SC-B6070 Common Errors

The most common error codes.

Error
1548Description: Oscillation error The control terminal (Vre terminal) of the cutter motor driver has shorted out.
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred.
113DDescription: Driving time-out error Abnormally-long driving duration of the CR MOTOR was detected.• Irregular load• Firmware becomes out of control.
1A26Description: RTC Access T/O error The RTC circuit on the MAIN BOARD malfunctions
1412Description: Pump life error The number of PUMP CAP UNIT operation has reached the specified limit. (The rotation of the pump motor has reached the specified limit.)
1548Description: Oscillation error The control terminal (Vre terminal) of the cutter motor driver has shorted out.
200DDescription: System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred.
113DDescription: Driving time-out error Abnormally-long driving duration of the CR MOTOR was detected.• Irregular load• Firmware becomes out of control.
1A26Description: RTC Access T/O error The RTC circuit on the MAIN BOARD malfunctions
1412Description: Pump life error The number of PUMP CAP UNIT operation has reached the specified limit. (The rotation of the pump motor has reached the specified limit.)