'

Epson Stylus Pro 9910 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson Stylus Pro 9910 Top Searches

These results are ranked by popularity.

Error
1A39Description: Head error The drive circuit in the Printhead is damaged due to a slant connection of the Head FFC, etc., or the fuse of the Main Board Assy may has blown because of such a wrong connection.
151FDescription: Lock error Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
1438Description: Maintenance tank error A Maintenance Tank for a wrong destination has been installed.
144DDescription: Driving time-out error. Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control.
122BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure

Epson Stylus Pro 9910 Common Errors

The most common error codes.

Error
1A39Description: Head error The drive circuit in the Printhead is damaged due to a slant connection of the Head FFC, etc., or the fuse of the Main Board Assy may has blown because of such a wrong connection.
151FDescription: Lock error Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
1438Description: Maintenance tank error A Maintenance Tank for a wrong destination has been installed.
144DDescription: Driving time-out error. Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control.
122BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure
1A39Description: Head error The drive circuit in the Printhead is damaged due to a slant connection of the Head FFC, etc., or the fuse of the Main Board Assy may has blown because of such a wrong connection.
151FDescription: Lock error Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure
1438Description: Maintenance tank error A Maintenance Tank for a wrong destination has been installed.
144DDescription: Driving time-out error. Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control.
122BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure