'

Epson Stylus Pro 9908 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Epson Stylus Pro 9908 Top Searches

These results are ranked by popularity.

Error
1A37Description: Thermistor error The Head FFC is not connected correctly. The thermistor detects a temperature out of the specification. The thermistor is broken.
150Description: PG phase detection error During PG operation, the PG HP Sensor cannot detect the change of status.
141BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure
2003Description: FLASH BOOT SUM CHECK error Installation of the firmware has been failed. The Flash ROM has a defect.
152EDescription: Velocity deviation error Detects that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Encoder failure • Motor driver failure • Motor failure

Epson Stylus Pro 9908 Common Errors

The most common error codes.

Error
1A37Description: Thermistor error The Head FFC is not connected correctly. The thermistor detects a temperature out of the specification. The thermistor is broken.
150Description: PG phase detection error During PG operation, the PG HP Sensor cannot detect the change of status.
141BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure
2003Description: FLASH BOOT SUM CHECK error Installation of the firmware has been failed. The Flash ROM has a defect.
152EDescription: Velocity deviation error Detects that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Encoder failure • Motor driver failure • Motor failure
1A37Description: Thermistor error The Head FFC is not connected correctly. The thermistor detects a temperature out of the specification. The thermistor is broken.
150Description: PG phase detection error During PG operation, the PG HP Sensor cannot detect the change of status.
141BDescription: Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure
2003Description: FLASH BOOT SUM CHECK error Installation of the firmware has been failed. The Flash ROM has a defect.
152EDescription: Velocity deviation error Detects that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Encoder failure • Motor driver failure • Motor failure