Error |
---|
These results are ranked by popularity.
Error | |
---|---|
E094 | Description: Transfer Roll Operating/Setting Error, or not installed. When the Secondary Transfer Sensor does not turn ON at separation of the Secondary Transfer Roller. |
E521 | Description: Extremely high fuser temperature (Pressure Roll Lamp). When the temperature detected by the Pressure Roller Thermistor rises above the specified temperature for longer than the predetermined time. |
E747 | Description: Optical Fan Motor error. When the lock signal is detected continuously for the predetermined time during fan rotation. |
C1550 | Description: Compression SRAM initialization hardware error |
E096 | Description: Primary transfer roller pressing/separation error. When the Primary Transfer Sensor does not turn ON at separation of the Primary Transfer Roller. |
The most common error codes.
Error | |
---|---|
E094 | Description: Transfer Roll Operating/Setting Error, or not installed. When the Secondary Transfer Sensor does not turn ON at separation of the Secondary Transfer Roller. |
E521 | Description: Extremely high fuser temperature (Pressure Roll Lamp). When the temperature detected by the Pressure Roller Thermistor rises above the specified temperature for longer than the predetermined time. |
E747 | Description: Optical Fan Motor error. When the lock signal is detected continuously for the predetermined time during fan rotation. |
C1550 | Description: Compression SRAM initialization hardware error |
E096 | Description: Primary transfer roller pressing/separation error. When the Primary Transfer Sensor does not turn ON at separation of the Primary Transfer Roller. |
E094 | Description: Transfer Roll Operating/Setting Error, or not installed. When the Secondary Transfer Sensor does not turn ON at separation of the Secondary Transfer Roller. |
E521 | Description: Extremely high fuser temperature (Pressure Roll Lamp). When the temperature detected by the Pressure Roller Thermistor rises above the specified temperature for longer than the predetermined time. |
E747 | Description: Optical Fan Motor error. When the lock signal is detected continuously for the predetermined time during fan rotation. |
C1550 | Description: Compression SRAM initialization hardware error |
E096 | Description: Primary transfer roller pressing/separation error. When the Primary Transfer Sensor does not turn ON at separation of the Primary Transfer Roller. |