These results are ranked by popularity.
Error | |
---|---|
E023 | Description: The tape cluster TPH resistance rank The TPH resistance rank is not properly set by DIPSW of the tape cluster PCB. DIPSW setting of the tape cluster PCB cannot be detected normally. |
E006 | Description: Press motor locked The press encoder sensor does not detect the edge within 0.5 seconds after the press motor starts rotating. During the press motor rotation, the press encoder sensor does not detect the edge for 0.1 second. When moving the |
E024 | Description: Disconnection/short circuit of the tape cluster thermistor The thermistor of the tape cluster PCB detects the abnormal temperature. |
E009 | Description: Thermal head voltage The thermal head power does not turn on during platemaking. |
E030 | Description: EEPROM (for the standard) Write/readout to the standard is defective. |
The most common error codes.
Error | |
---|---|
E023 | Description: The tape cluster TPH resistance rank The TPH resistance rank is not properly set by DIPSW of the tape cluster PCB. DIPSW setting of the tape cluster PCB cannot be detected normally. |
E006 | Description: Press motor locked The press encoder sensor does not detect the edge within 0.5 seconds after the press motor starts rotating. During the press motor rotation, the press encoder sensor does not detect the edge for 0.1 second. When moving the |
E024 | Description: Disconnection/short circuit of the tape cluster thermistor The thermistor of the tape cluster PCB detects the abnormal temperature. |
E009 | Description: Thermal head voltage The thermal head power does not turn on during platemaking. |
E030 | Description: EEPROM (for the standard) Write/readout to the standard is defective. |
E023 | Description: The tape cluster TPH resistance rank The TPH resistance rank is not properly set by DIPSW of the tape cluster PCB. DIPSW setting of the tape cluster PCB cannot be detected normally. |
E006 | Description: Press motor locked The press encoder sensor does not detect the edge within 0.5 seconds after the press motor starts rotating. During the press motor rotation, the press encoder sensor does not detect the edge for 0.1 second. When moving the |
E024 | Description: Disconnection/short circuit of the tape cluster thermistor The thermistor of the tape cluster PCB detects the abnormal temperature. |
E009 | Description: Thermal head voltage The thermal head power does not turn on during platemaking. |
E030 | Description: EEPROM (for the standard) Write/readout to the standard is defective. |