Duplo DPS550 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Duplo DPS550 Top Searches

These results are ranked by popularity.

Error
E030Description: EEPROM (for the standard) Write/readout to the standard is defective.
E011Description: Thermal head up/down motor locked The thermal head position sensor does not detect the edge within 1.5 seconds after the thermal head up/down motor starts rotating.
E031Description: EEPROM (for the key card) Write/readout to the key card is defective.
E012Description: Clamp motor Within 3 seconds after the clamp motor starts rotating, the clamp sensor 1/the clamp sensor 2 does not detect that B mode/C mode is entered.
E032Description: Panel communication Communication between the main PCB and the panel PCB is defective.

Duplo DPS550 Common Errors

The most common error codes.

Error
E030Description: EEPROM (for the standard) Write/readout to the standard is defective.
E011Description: Thermal head up/down motor locked The thermal head position sensor does not detect the edge within 1.5 seconds after the thermal head up/down motor starts rotating.
E031Description: EEPROM (for the key card) Write/readout to the key card is defective.
E012Description: Clamp motor Within 3 seconds after the clamp motor starts rotating, the clamp sensor 1/the clamp sensor 2 does not detect that B mode/C mode is entered.
E032Description: Panel communication Communication between the main PCB and the panel PCB is defective.
E030Description: EEPROM (for the standard) Write/readout to the standard is defective.
E011Description: Thermal head up/down motor locked The thermal head position sensor does not detect the edge within 1.5 seconds after the thermal head up/down motor starts rotating.
E031Description: EEPROM (for the key card) Write/readout to the key card is defective.
E012Description: Clamp motor Within 3 seconds after the clamp motor starts rotating, the clamp sensor 1/the clamp sensor 2 does not detect that B mode/C mode is entered.
E032Description: Panel communication Communication between the main PCB and the panel PCB is defective.