Canon iRC3100F Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC3100F Top Searches

These results are ranked by popularity.

Error
E003-0001Description: Low temperature of the fixing unit after standby Abnormal low temperature (130 deg C or lower) of the non-contact thermistor is detected for 3.5 sec continuously after standby.
E593-0001Description: Puncher shift motor error The HP sensor fails to be OFF.
E5F8-0002Description: Saddle connector error Disconnection of the paper pressure plate HP sensor connector is detected.
E514-0002Description: Stack delivery error Finisher-P1 The HP sensor fails to be OFF within 1500ms after the return belt starts to move to the belt contact position.
E532-0002Description: Staple unit shift error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the staple unit starts to move from its HP.

Canon iRC3100F Common Errors

The most common error codes.

Error
E003-0001Description: Low temperature of the fixing unit after standby Abnormal low temperature (130 deg C or lower) of the non-contact thermistor is detected for 3.5 sec continuously after standby.
E593-0001Description: Puncher shift motor error The HP sensor fails to be OFF.
E5F8-0002Description: Saddle connector error Disconnection of the paper pressure plate HP sensor connector is detected.
E514-0002Description: Stack delivery error Finisher-P1 The HP sensor fails to be OFF within 1500ms after the return belt starts to move to the belt contact position.
E532-0002Description: Staple unit shift error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the staple unit starts to move from its HP.
E003-0001Description: Low temperature of the fixing unit after standby Abnormal low temperature (130 deg C or lower) of the non-contact thermistor is detected for 3.5 sec continuously after standby.
E593-0001Description: Puncher shift motor error The HP sensor fails to be OFF.
E5F8-0002Description: Saddle connector error Disconnection of the paper pressure plate HP sensor connector is detected.
E514-0002Description: Stack delivery error Finisher-P1 The HP sensor fails to be OFF within 1500ms after the return belt starts to move to the belt contact position.
E532-0002Description: Staple unit shift error Finisher-P1 The HP sensor fails to be OFF within 1000ms after the staple unit starts to move from its HP.