Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC2620 Top Searches

These results are ranked by popularity.

Error
E711-0001Description: There is a fault in IPC communication. DADF-K1 There is a fault in data communication. The ADF controller or the reader controller PCB is faulty. The connector between the reader unit and the ADF has poor connection. An error has been detec
E504-0004Description: There is a fault in stack size detection. Finisher-N1/Saddle Finisher-N2 The DIP switch for the height sensor (PS1) is not adjusted correctly. There is a fault in the adjustment of the sensor by the DIP switch.
E733-0000Description: There is a printer communication error. The printer unit cannot be detected at startup.
E540-0002Description: There is a fault in the ascent/descent of the tray. Finisher-N1/Saddle Finisher-N2 The tray upper limit detecting switch (MS5) is faulty. The tray upper limit detecting switch is ON during tray ascent/descent operation.
E004-0001Description: The protection circuit of the fixing unit is faulty. A short circuit of the triac is detected for 500 msec continuously.

Canon iRC2620 Common Errors

The most common error codes.

Error
E711-0001Description: There is a fault in IPC communication. DADF-K1 There is a fault in data communication. The ADF controller or the reader controller PCB is faulty. The connector between the reader unit and the ADF has poor connection. An error has been detec
E504-0004Description: There is a fault in stack size detection. Finisher-N1/Saddle Finisher-N2 The DIP switch for the height sensor (PS1) is not adjusted correctly. There is a fault in the adjustment of the sensor by the DIP switch.
E733-0000Description: There is a printer communication error. The printer unit cannot be detected at startup.
E540-0002Description: There is a fault in the ascent/descent of the tray. Finisher-N1/Saddle Finisher-N2 The tray upper limit detecting switch (MS5) is faulty. The tray upper limit detecting switch is ON during tray ascent/descent operation.
E004-0001Description: The protection circuit of the fixing unit is faulty. A short circuit of the triac is detected for 500 msec continuously.
E711-0001Description: There is a fault in IPC communication. DADF-K1 There is a fault in data communication. The ADF controller or the reader controller PCB is faulty. The connector between the reader unit and the ADF has poor connection. An error has been detec
E504-0004Description: There is a fault in stack size detection. Finisher-N1/Saddle Finisher-N2 The DIP switch for the height sensor (PS1) is not adjusted correctly. There is a fault in the adjustment of the sensor by the DIP switch.
E733-0000Description: There is a printer communication error. The printer unit cannot be detected at startup.
E540-0002Description: There is a fault in the ascent/descent of the tray. Finisher-N1/Saddle Finisher-N2 The tray upper limit detecting switch (MS5) is faulty. The tray upper limit detecting switch is ON during tray ascent/descent operation.
E004-0001Description: The protection circuit of the fixing unit is faulty. A short circuit of the triac is detected for 500 msec continuously.