Canon iRC2020 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC2020 Top Searches

These results are ranked by popularity.

Error
E5F3-0001Description: The alignment plate home position sensor does not turn on even when the alignment motor has been driven for 0.5 sec or more.
E404Description: The number of clock pulses within 200 msec is lower than a specific value.
E014-0004Description: The motor rotates in the direction opposite the desired direction.
E717Description: When the copy start signal is generated, the count pulse is not detected by the Copier Controller-A1 or the NE controller within a specific period of time. After connection, the Copy Data Controller-A1 or the NE Controller is disconnected.
E051-0001Description: The home position of the side registration sensor (S32) cannot be detected. The home position cannot be detected when 24-V power is turned on in response to the turning on of the main power switch or the opening and closing of the front cove

Canon iRC2020 Common Errors

The most common error codes.

Error
E5F3-0001Description: The alignment plate home position sensor does not turn on even when the alignment motor has been driven for 0.5 sec or more.
E404Description: The number of clock pulses within 200 msec is lower than a specific value.
E014-0004Description: The motor rotates in the direction opposite the desired direction.
E717Description: When the copy start signal is generated, the count pulse is not detected by the Copier Controller-A1 or the NE controller within a specific period of time. After connection, the Copy Data Controller-A1 or the NE Controller is disconnected.
E051-0001Description: The home position of the side registration sensor (S32) cannot be detected. The home position cannot be detected when 24-V power is turned on in response to the turning on of the main power switch or the opening and closing of the front cove
E5F3-0001Description: The alignment plate home position sensor does not turn on even when the alignment motor has been driven for 0.5 sec or more.
E404Description: The number of clock pulses within 200 msec is lower than a specific value.
E014-0004Description: The motor rotates in the direction opposite the desired direction.
E717Description: When the copy start signal is generated, the count pulse is not detected by the Copier Controller-A1 or the NE controller within a specific period of time. After connection, the Copy Data Controller-A1 or the NE Controller is disconnected.
E051-0001Description: The home position of the side registration sensor (S32) cannot be detected. The home position cannot be detected when 24-V power is turned on in response to the turning on of the main power switch or the opening and closing of the front cove