Canon iRC1030 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC1030 Top Searches

These results are ranked by popularity.

Error
E078-0000Description: Error in primary transfer estrangement unit Primary transfer estrangement unit does not function properly.
E003-0001Description: Error in abnormally low temperature of fixing assembly The status where the detected temperature of the sub thermistor is less than 100 deg C (approx. 0.38V equivalent) is detected 0.5 continuous sec or more after energization of the heater
E202-0001Description: Reader HP sensor fault Reader HP outward fault.
E012-0009Description: Error in activation of motor Bk After the black drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.
E744-0002Description: Language file/boot ROM/USB memory error Language file size error

Canon iRC1030 Common Errors

The most common error codes.

Error
E078-0000Description: Error in primary transfer estrangement unit Primary transfer estrangement unit does not function properly.
E003-0001Description: Error in abnormally low temperature of fixing assembly The status where the detected temperature of the sub thermistor is less than 100 deg C (approx. 0.38V equivalent) is detected 0.5 continuous sec or more after energization of the heater
E202-0001Description: Reader HP sensor fault Reader HP outward fault.
E012-0009Description: Error in activation of motor Bk After the black drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.
E744-0002Description: Language file/boot ROM/USB memory error Language file size error
E078-0000Description: Error in primary transfer estrangement unit Primary transfer estrangement unit does not function properly.
E003-0001Description: Error in abnormally low temperature of fixing assembly The status where the detected temperature of the sub thermistor is less than 100 deg C (approx. 0.38V equivalent) is detected 0.5 continuous sec or more after energization of the heater
E202-0001Description: Reader HP sensor fault Reader HP outward fault.
E012-0009Description: Error in activation of motor Bk After the black drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.
E744-0002Description: Language file/boot ROM/USB memory error Language file size error