Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iRC1028iF Top Searches

These results are ranked by popularity.

Error
E024-0001Description: Toner level sensor failure Failure output from the toner level sensor (Magenta).
E194-0000Description: Error in CPR sensor Cannot detect color displacement detection pattern, detected results fall outside the acceptable range.
E000-0000Description: Error in start-up of fixing assembly When 1 sec passed after energization of the heater, the detected temperature of the main thermistor is not 5 deg C or more (0 deg C at power on).
E202-0001Description: Reader HP sensor fault Reader HP outward fault.
E012-0005Description: Error in activation of motor M After the magenta drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.

Canon iRC1028iF Common Errors

The most common error codes.

Error
E024-0001Description: Toner level sensor failure Failure output from the toner level sensor (Magenta).
E194-0000Description: Error in CPR sensor Cannot detect color displacement detection pattern, detected results fall outside the acceptable range.
E000-0000Description: Error in start-up of fixing assembly When 1 sec passed after energization of the heater, the detected temperature of the main thermistor is not 5 deg C or more (0 deg C at power on).
E202-0001Description: Reader HP sensor fault Reader HP outward fault.
E012-0005Description: Error in activation of motor M After the magenta drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.
E024-0001Description: Toner level sensor failure Failure output from the toner level sensor (Magenta).
E194-0000Description: Error in CPR sensor Cannot detect color displacement detection pattern, detected results fall outside the acceptable range.
E000-0000Description: Error in start-up of fixing assembly When 1 sec passed after energization of the heater, the detected temperature of the main thermistor is not 5 deg C or more (0 deg C at power on).
E202-0001Description: Reader HP sensor fault Reader HP outward fault.
E012-0005Description: Error in activation of motor M After the magenta drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more.