Canon iR9070 Error Codes


Select an Error Code or Type an Error Code to begin searching

Error


Have a better picture? Update the product image. PNG Only. Open a new private window or clear your cache to see the new image.


Canon iR9070 Top Searches

These results are ranked by popularity.

Error
E602Description: There is an error on the hard disk.
E067-0000Description: There is an error in the high-voltage output. An error is detected in two or more of the following at the same time: the primary high voltage, pre-transfer high voltage, transfer high voltage, and separation high voltage. Or, an error (leak
E745Description: There is a fault on the TokenRing board
E215-0000Description: The rise in temperature of the scanning lamp heater is faulty. While the scanning lamp is OFF, the reading of the ambient temperature is 170 deg C or higher.
E003-0000Description: The fixing temperature is too low after a standby state. The reading of the main thermistor is 70 deg C or lower for 2 sec or more after it has reached 100 deg C.

Canon iR9070 Common Errors

The most common error codes.

Error
E602Description: There is an error on the hard disk.
E067-0000Description: There is an error in the high-voltage output. An error is detected in two or more of the following at the same time: the primary high voltage, pre-transfer high voltage, transfer high voltage, and separation high voltage. Or, an error (leak
E745Description: There is a fault on the TokenRing board
E215-0000Description: The rise in temperature of the scanning lamp heater is faulty. While the scanning lamp is OFF, the reading of the ambient temperature is 170 deg C or higher.
E003-0000Description: The fixing temperature is too low after a standby state. The reading of the main thermistor is 70 deg C or lower for 2 sec or more after it has reached 100 deg C.
E602Description: There is an error on the hard disk.
E067-0000Description: There is an error in the high-voltage output. An error is detected in two or more of the following at the same time: the primary high voltage, pre-transfer high voltage, transfer high voltage, and separation high voltage. Or, an error (leak
E745Description: There is a fault on the TokenRing board
E215-0000Description: The rise in temperature of the scanning lamp heater is faulty. While the scanning lamp is OFF, the reading of the ambient temperature is 170 deg C or higher.
E003-0000Description: The fixing temperature is too low after a standby state. The reading of the main thermistor is 70 deg C or lower for 2 sec or more after it has reached 100 deg C.