These results are ranked by popularity.
Error | |
---|---|
E732-0001 | Description: The connector has poor contact. The reader controller PCB is faulty. The main controller PCB has detected an error in the communication between the reader controller PCB and the main controller PCB. |
E5F5-0001 | Description: The stitch home position senor (front, MS7S) is faulty. The stitch motor (front, M7S) is faulty. The saddle stitcher controller PCB is faulty. The stitch home position sensor (front) does not turn off when the stitch motor (front) has been |
E504-0003 | Description: The height sensor (PS1) is faulty. The finisher controller PCB is faulty. At time of power-on, the connector of the height sensor is found to be disconnected. |
E032-0001 | Description: The copy data controller or the remote diagnostic device is faulty. The Main controller PCB is faulty. Although once connected, the copy data controller or the remote diagnostic device has become disconnected. |
E532-0002 | Description: The stapler shift home position sensor (PI7) is faulty. The stapler shift motor (M4) is faulty. The finisher controller PCB is faulty. The stapler unit does not return to home position when the stapler shift motor has been driven for 4 secs |
The most common error codes.
Error | |
---|---|
E732-0001 | Description: The connector has poor contact. The reader controller PCB is faulty. The main controller PCB has detected an error in the communication between the reader controller PCB and the main controller PCB. |
E5F5-0001 | Description: The stitch home position senor (front, MS7S) is faulty. The stitch motor (front, M7S) is faulty. The saddle stitcher controller PCB is faulty. The stitch home position sensor (front) does not turn off when the stitch motor (front) has been |
E504-0003 | Description: The height sensor (PS1) is faulty. The finisher controller PCB is faulty. At time of power-on, the connector of the height sensor is found to be disconnected. |
E032-0001 | Description: The copy data controller or the remote diagnostic device is faulty. The Main controller PCB is faulty. Although once connected, the copy data controller or the remote diagnostic device has become disconnected. |
E532-0002 | Description: The stapler shift home position sensor (PI7) is faulty. The stapler shift motor (M4) is faulty. The finisher controller PCB is faulty. The stapler unit does not return to home position when the stapler shift motor has been driven for 4 secs |
E732-0001 | Description: The connector has poor contact. The reader controller PCB is faulty. The main controller PCB has detected an error in the communication between the reader controller PCB and the main controller PCB. |
E5F5-0001 | Description: The stitch home position senor (front, MS7S) is faulty. The stitch motor (front, M7S) is faulty. The saddle stitcher controller PCB is faulty. The stitch home position sensor (front) does not turn off when the stitch motor (front) has been |
E504-0003 | Description: The height sensor (PS1) is faulty. The finisher controller PCB is faulty. At time of power-on, the connector of the height sensor is found to be disconnected. |
E032-0001 | Description: The copy data controller or the remote diagnostic device is faulty. The Main controller PCB is faulty. Although once connected, the copy data controller or the remote diagnostic device has become disconnected. |
E532-0002 | Description: The stapler shift home position sensor (PI7) is faulty. The stapler shift motor (M4) is faulty. The finisher controller PCB is faulty. The stapler unit does not return to home position when the stapler shift motor has been driven for 4 secs |